INDOOR FLAGPOLES
 PARADE FLAGPOLES
 TIMBER FLAGPOLES
 FLAGPOLES
 WINDSOCK POLES
 WINDSOCK FRAMES
 WINDSOCKS
 WALL FLAGPOLES
 TELESCOPIC POLES
 PORTABLE POLES
 TABLE FLAGS
 HANDWAVERS
 AUSTRALIAN FLAGS
 ABORIGINAL FLAGS
 NAIDOC FLAGS
 SEWN FLAGS
 SATIN FLAGS
 WORLD FLAGS
 GENERAL FLAGS
 ADF FLAGS
 RAAF FLAGS
 RAN FLAGS
 RSL FLAGS
 POLICE FLAGS
 CYCLONE FLAGS
 SCOUT FLAGS
 CUSTOM FLAGS
 FLAG HOLSTERS
 FLAGPOLE STANDS
 FLAGPOLE FINIALS
 FLAGPOLE PARTS
 FLAGPOLE REPAIRS
 FLAG FITTINGS
 FLAG HIRE
 GALLERY
 

 FLAGPOLES


Simply the most superior anodised aluminium, or gloss white powder coated flagpoles manufactured in Australia today. Professionally hand crafted and fitted with the finest and most durable of all flagpole components. Our range of all modern proven reliable quality flagpoles utilise only premium UV Resistant flagpole parts, designed to easily withstand the test of time & endure the extremes of the harshest Australian climate. Our unique & exclusive range of heavy wall, structural grade aluminium flagpoles are also design certified to cyclone standards, thus ensuring your guaranteed satisfaction.



Flagpole



External Rope Flagpole Features: Heavy high tensile structural grade aluminium. Marine grade 20 micron anodised natural finish or gloss white powder coated finish. Solid cast aluminium mushroom shape finial; Stainless steel and nylon rope fairlead. Premium 6mm UV resistant marine braided flagpole rope. Low noise nylon flag clips. Nylon UVR halyard protector stop ball. Galvanised steel rope joiner sleeve covered. Marine grade stainless steel rope tie off cleat. Stainless steel riveted construction. 
25 Year Manufacturer’s Warranty.

   MODEL   

  HEIGHT     DIA

    FINISH   

 POWDER COAT 

   ROPE    

 F460EXT 

     4 MTR  

60MM

 ANODISED 

  GLOSS WHITE

 EXTERNAL 

F560EXT

5 MTR

60MM ANODISED   GLOSS WHITE EXTERNAL
F480EXT

4 MTR

80MM ANODISED   GLOSS WHITE EXTERNAL
F580EXT 5 MTR 80MM ANODISED   GLOSS WHITE EXTERNAL
F680EXT 6 MTR 80MM ANODISED   GLOSS WHITE EXTERNAL
F780EXT 7 MTR 80MM  ANODISED    GLOSS WHITE  EXTERNAL
F8100EXT  8 MTR 100MM  ANODISED    GLOSS WHITE EXTERNAL
F9100EXT  9 MTR 100MM ANODISED   GLOSS WHITE EXTERNAL

Internal Rope Flagpole Features: Heavy high tensile structural grade aluminium. Marine grade 20 micron anodised natural finish or a gloss white powder coated finish. Solid cast aluminium mushroom shape finial; Stainless Steel marine grade pulley box. Premium 6mm UV resistant marine braided flagpole rope; Low noise nylon flag clips.  Nylon UVR top & bottom halyard protector stop balls. PVC covered lead rope weight. Galvanised steel rope joiner shrink sleeve covered. Easy access rope hatch; internal marine grade aluminium rope jammer. Solid aluminium security locking collar. Flush fitting Stainless Steel security locking screw. All Stainless Steel riveted construction.
25 Year Manufacturer’s Warranty.


   MODEL   

   HEIGHT    DIA

    FINISH 

 POWDER COAT 

    ROPE   

 F480INT 

  4 MTR  

80MM

ANODISED

  GLOSS WHITE 

 INTERNAL 

 F580INT 

      5 MTR  

80MM

 ANODISED 

 GLOSS WHITE

 INTERNAL 

F680INT

6 MTR

80MM ANODISED  GLOSS WHITE INTERNAL
F7100INT

7 MTR

100MM ANODISED  GLOSS WHITE INTERNAL
F8100INT 8 MTR 100MM ANODISED   GLOSS WHITE  INTERNAL
F9100INT 9 MTR 100MM ANODISED  GLOSS WHITE INTERNAL

EXTERNAL FLAGPOLE ROPE MODEL

External Flapgole Rope
STAINLESS TIE OFF CLEAT
External Rope
CAST FINIAL & FAIRLEAD
External Rope
FLAGPOLE RIGGING

INTERNAL FLAGPOLE ROPE MODEL

Flagpole Collar Open
INTERNAL ROPE HATCH 
Flagpole Locking Collar
LOCKING COLLAR
Flagpole Internal Rope
STAINLESS PULLEY BOX 

OPTIONAL FLAGPOLE MOUNTINGS

Flagpole Base Pivoting Windsock Pole Base Tilt Down Windsock Pole Base Cantilever Windsock Pole By Adwareflags.com
HPB01
HINGED PIVOTING BASE


Flagpole Wall Brackets affix to concrete & brick walls or building facades heavy duty galvanised steel
WMB02
WALL MOUNT BRACKETS


Bolt Direct to Concrete Flagpole Base, or utilise with cage bolt & template for inground concrete footing Galvanised Steel
BCB03
BOLT TO CONCRETE BASE


Flagpole cage bolt assembly, welded construction used with template for traditional concrete footing base plate installation galvanised steel.
CBA04
CAGE BOLT ASSEMBLY

Flagpole timber cage bolt installation template provides a level pad for Flagpole base plate installation.
IT005
INSTALLATION TEMPLATE

Flagpole Inground Installation Spigot Tube, set directly into concrete footing galvanised steel
IST06
INGROUND SPIGOT TUBE


HINGED FLAGPOLE BASE

Hinged flagpoles or pivoting flagpoles are also known as fold down flagpoles, tilting flagpoles, cantilever flagpoles or tilt down lowering flagpoles are ideal for any site. When it comes to flagpoles, our superior designed laser cut and galvanised hinged base allows for flagpole rope replacement or flagpole maintenance fast, simple and safe. No more cherry pickers, travel towers or boom lifts required. Hinged flagpoles are installed in combination with welded inground cage bolt assemblies and timber installation template. Heavy duty high strength anodised Aluminium & high polished Stainless Steel flagpoles  designed, manufactured & structural engineer certified to withstand cyclonic winds - categories 1 - 5.  A1- A5. B. C. D. regions of Australia.

WALL MOUNT BRACKETS 

Wall mount flagpoles or wall mountable flagpoles are supplied with a set of heavy duty galvanised steel wall brackets, specially designed to facilitate, ease of any installation and provide long lasting corrosion resistance. Easily affixed to all brick walls, concrete walls and building facades. Wall mountable flagpoles are supplied with an additional aluminium tube, which is used as a template to correctly pre affix and set the wall brackets in place, before the final fitting and fixing of the flagpole itself.  
 
BOLT TO CONCRETE BASE 

These fully galvanised universal, dual purpose flagpole bases can be installed as a standard flagpole base combined with an in ground flagpole cage bolt assembly or alternatively, bolted directly to a suitable industrial grade concrete base via Dyna Bolts. Direct bolt to concrete flagpole installations are only utilised for industrial or commercial hard areas, building rooftops, or where a suitable approved concrete base is available, or specified by architects for above ground flagpole installations. Bolt direct to concrete flagpoles should only be considered via consultation with a structural engineer, to ascertain the correct depth and stability of concrete base.  
 
CAGE BOLT ASSEMBLY 

Our superior designed & manufactured flagpole cage bolt assemblies are precision welded, forming a single heavy duty inground installation box frame of galvanised steel. Unlike other systems, our cage frames are simple to install when used with our timber installation templates. Being of a box type construction, they provide super high strength and remain, permanently fixed without movement within the concrete footing. Additionally, we recommend that three pieces of Rio Mesh be utilised at the bottom, centre and below the top of the concrete footing, or the foundation. Rio mesh  provides  additional reinforcement to the concrete, ensuring protection against cracking & reducing possible movement of the footing in certain sub soils. All above ground cage bolt components including, lock nuts and washers are also hot dip galvanised, therefore no parts of the flagpoles cage frame are subject to rust or corrosion, providing a superior, professional flagpole installation.
 
INSTALLATION TEMPLATE 

Our unique flagpole installation templates are used in conjunction with the above cage bolt assemblies. They are a simple and reliable installation method providing several benefits. Firstly, the template allows the correct setting required for the cage frame thread heights to be attained, by adjusting nuts and washers on top of the template itself. Secondly, it helps form the top of the curing concrete into a flat square level base pad, by means of levelling across the board, once poured while the concrete is wet. Once the concrete has cured, the template is removed revealing a flat, level base pad for seating of the flagpole's base plate. To ensure a perfectly level flagpole set up, minor corrections to base pad levelling are done by means of additional washers put underneath the flagpole's steel base plate. Always ensure that a structural grade concrete is used for all footings, and allow concrete to fully cure before any flagpoles are installed. (Do Not Use Quick Set Concrete).
 
INGROUND SPIGOT TUBE 

Inground spigot tubes are suitable for flagpoles up to six meters, and are a more economical means of flagpole installation. Firstly, the ground is excavated and the concrete is poured. Next, the spigot tube is set into the flagpoles footings centre at the correct depth. After this, the spigot tube is then levelled and braced with timber at four opposite points holding it firmly in place until the concrete has fully cured. Next, the flagpole is simply raised over the tube and pushed down to the bottom of the footing. The flagpole is then fixed to the spigot tube by means of a pop rivet.
 
ANODISED FINISH 


All outdoor flagpoles are supplied with a superior marine grade 20 micron anodised finish, providing the most durable and corrosion resistant finish available. Anodised finishes are unique, as the finish itself is directly etched into the aluminium surface, therefore offering a far superior, complete internal and external resistance to any oxidisation or corrosion. Anodised finishes are especially important within a marine area or coastal region and are regarded as first choice. Anodised flagpoles are also far more resistant to any possible abrasion from the flagpoles rope and flag clips.  
Our quality marine grade anodised flagpoles are simply the best that you can buy!
 
POWDER COATED FINISH

Our superior high gloss white powder coated flagpoles are the finest that can be produced. Unlike a standard powder coated finish which firstly involves an initial application of an etch primer or pigment primer to the mill surface of the aluminium to aid bonding of the electrical charged top coat powder pigments. Once coated the resulting top coat finish exhibits a rough or uneven low build finish, with no internal corrosion resistance due to it being a simple and basic external surface finish only. Adware's high gloss white powder coated finishes are unique in as much as they far exceed all other painted or powder coated finishes available. Our
superior powder coat finishing system firstly begins with flagpoles that have been already pre acid etched and anodised. The benefits of powder coating by this system firstly, offers a very smooth pre etched surface which provides an excellent base thus enabling full maximum top coat adhesion. Secondly, it produces a far superior and higher build of finish. Our unique two stage finishing system of combined anodising and powder coating also provides the highest form of internal and external resistance against top coat delamination, with the highest anti corrosion and anti oxidisation protection.

FLAGPOLE COMPONENTS 

Only the highest quality flagpole components, also known as flagpole parts or flagpole fittings, are used in the manufacture of our flagpole range. All pole parts are utilised for their superior strength, durability and resistance to high winds, rain and UV light, resulting in flagpoles that are properly manufactured to last a lifetime.
 
FLAGPOLE ROPE 

When it comes to flagpole rope, also known as flagpole rigging, flag rope, or by the nautical term flagpole halyard, we supply and use the highest quality marine grade rope for all our flagpoles produced. Double braided polyester flagpole rope has many advantages. Firstly, polyester is naturally UV resistant, therefore it won't breakdown or degrade. Also, it is naturally water repellent and will not easily fray overtime with use. It is also incredibly strong and regarded as the best flagpole rope available.


All flagpoles are manufactured from T6-6063 or T6-6082 high tensile aluminium.
To Australian Standards AS1170.1 - 2002, AS1170.2 - 2011 Wind Loadings.
AS1664.2 -1997 Aluminium Structures Code, AS4100 -1998 Steel Structures Code
AS4680:2006 Hot-dip Galvanised (zinc) coatings on ferrous steel articles.
AS1554.1 - 2004 Structural Steel Welding or Welding of Steel Structures.


SEE OUR QUALITY WALL FLAGPOLES  

Adwareflags.com Official Australian Made licensee. Manufacturers of superior quality Flag & Flagpole Products. Distributors Australia Wide.


AUSTRALIAN DISTRIBUTOR LOCATIONS

Victoria, VIC
Melbourne, Albury, Altona, Anglesea, Bendigo, Campbellfield, Dandenong, Kew, Derrimut, Geelong, Mildura, Morwell, Portland, Scoresby, Hamilton, Swan Hill, Shepparton, Traralgon, Sale, Warrnambool, Wendouree, Ballarat, Yallourn,
Horsham, Greensborough, Mulgrave, Richmond, Hawthorn, Werribee, Pakenham. 


New South Wales, NSW
Sydney, Albury, Broken Hill, Cardiff, Coffs Harbour, Dubbo, Griffith, Lambton, Lismore, Mussellbrook, Newcastle, Orange, Punchbowl, Singleton, Smithfield, Tamworth, Tuggerah, Unanderra, Wagga Wagga, Wetherill Park, Wickham,
Ballina, Grafton, Byron Bay, Lithgow, Tweed Heads, Port Kembla, Wollongong.

Australian Capital Territory, ACT
Barton, Canberra, Charnwood, Deakin, Forrest, Fyshwick, Braddon, Griffith, Kambah, Mitchell, Monash, O'Connor, Palmerston, Queanbeyan, Stirling, Weston.


Queensland, QLD
Brisbane, Acacia Ridge, Blackwater, Bowen Basin, Brendale, Bundaberg, Cairns, Carole Park, Eagle Farm, Emerald, Garbutt, Townsville, Gladstone, Gympie, Logan, Nerang, Ravenswood, Rockhampton, Paget, Mackay, Roma, Redcliffe, Southport, Sunset, Sunshine Coast, Tingalpa, Toowoomba, Wacol, Warwick, Ipswich, Gold Coast, Caboolture, Dalby, Coolangatta, Maryborough, Theodore, Hervey Bay.        

Northern Territory, NT
Darwin, Alice Springs, Winnellie, Casuarina, Berrimah, Katherine, Tennant Creek, Palmerston, Tindal, Charles Darwin, Wickham, Berrimah, Coonawarra, Nullunbuy.

Western Australia, WA
Perth, Albany, Bayswater, Broome, Bunbury, Carnarvon, Canningvale, Collie, Derby, Esperance, Exmouth, Fremantle, Geraldton, Greenwood, Kalgoorlie, Karratha, Kununurra, Kwinana, Malaga, Mandurah, Midland, Newman, Peggs Creek, Pilbara, Collinsville, Port Hedland, Rockingham, Subiaco, Telfer, Tom Price, Welshpool, Onslow, Dampier, Barrow Island, West Perth, Bibra Lake, Wattleup, Paraburdoo, Telfer, Roebourne, Marble Bar, Rocklea, Mulga Downs, Pardoo.

South Australia, SA
Adelaide, Mt Gambier, Maree, Murray Bridge, Port Adelaide, Port Augusta, Port Pirie, Port Lincoln, Regency Park, Roxby Downs, Victor Harbour, Woomera, Whyalla, Ceduna, Glenelg, Willunga, Gawler, Crystal Brook, Renmark, North Adelaide, Unley, Mount Barker, Norwood, Bridgewater, Morphett Vale, Goodwood.

Tasmania, TAS
Hobart, Burnie, Derwent Park, Devonport, Invermay, Launceston, Moonah,
Ulverstone, Invermay, Trevallyn, Glenorchy, New Town, Ravenswood, Riverside.

All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.

Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents
or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.



                              Copyright © 2017, Adware Flags & Flagpoles   Maintained by Indiana Productions
X

Permission Denied

Copyright © 2017 Adware Flags & Flagpoles